Blog

High-efficiency casting special recarburizer, high fixed carbon, high absorption rate, low sulfur and nitrogen, easy to absorb, effectively reduce pore inclusions, optimize graphite morphology, increase spheroidization grade, improve casting...

What are the advantages of columnar recarburizers can be seen from the market feedback in the past two years: the production of columnar recarburizers and rods recarburizers is constantly increasing, and the content is also floating between...

Features: 1. High fixed carbon, high absorption rate, low sulfur and low nitrogen, and the absorption speed is faster than similar graphitized recarburizers, and does not adsorb on the furnace wall, completely absorbs without residue, and t...

High-quality carburant generally refers to a carburant that has undergone graphitization. Under high temperature conditions, the arrangement of carbon atoms is in the microscopic form of graphite, so it is called graphitization. Graphitizat...

Recarburizer generally refers to a recarburizer that has undergone graphitization. Under high temperature conditions, the arrangement of carbon atoms is microscopic graphite, so it is called graphitization. Graphitization can reduce the con...

There are many problems in the work of electric furnaces. The following is only an introduction to some common problems. 1. The element burn is too large The burning loss of Si, Mn, Cr and other easily oxidizable elements.........

According to the content of silicon, manganese, sulfur, phosphorus and other elements, corrosion-resistant cast iron can be divided into the following categories: High silicon cast iron. High silicon cast iron is divided into rare earth medi...

Corrosion-resistant cast iron refers to special cast iron that can prevent or delay the corrosion of certain corrosive media. From the perspective of chemical composition, corrosionresistant cast iron belongs to alloy cast iron . In addition...

Common Alloy cast iron can be divided into three categories: wear-resistant cast iron, heat-resistant cast iron, and corrosion-resistant cast iron. Wear-resistant cast iron can be roughly divided into two categories according to its working...

Cast iron refers to a multi-element iron-based alloy with carbon content greater than 2.11% and more elements such as silicon, manganese, etc.; cast iron has a simple production process and low cost, and is the earliest used and most widely...

The influence of recarburizer on smelting mainly has three aspects. 1. Liquid iron recarburization technology, especially in electric furnace smelting, can increase graphite nuclei.2. Carbon increase is the best measure to prevent or reduce.........

Graphite is one of the simple forms of carbon, with very low strength, hardness and plasticity. Graphitization refers to the process in which carbon atoms precipitate and form graphite in cast iron. According to the classification of graphit...