calcium ferro cored wire

　　Calcium ferro cored wire an indispensable deoxidizer and slag remover during steelmaking. However, how to improve the effect and yield rate of Calcium ferro cored wire has always troubled steel manufacturers. In fact, the factors affecting Calcium ferro cored wire It is mainly the speed of wire feeding. If the wire feeding speed is appropriate, the effect of the calcium iron cored wire inserted during steelmaking will be more thorough. Then how much is the feeding speed of the calcium iron cored wire during steelmaking? The Calcium ferro cored wire manufacturers are introduced for everyone.

　　In the actual steelmaking application of Calcium ferro cored wire, in order to increase the yield of the alloy in the Calcium ferro cored wire, the Calcium ferro cored wire should be melted as deep as possible in the molten steel. Generally, the Calcium ferro cored wire should be cored. It is better to insert the wire into the molten steel grain ladle about 300 mm lower, but this has to take into account the feeding speed of the Calcium ferro cored wire. If the speed is too slow, the Calcium ferro cored wire will melt before reaching a certain depth. If the speed is too fast, it will exceed the appropriate depth. Therefore, it is more reasonable to adjust the feeding speed of the Calcium ferro cored wire by the mathematical analysis method. The steel manufacturer can combine the mathematical analysis method with the test method and pass The heat transfer characteristics of the cored wire fed into molten steel are calculated to obtain a more ideal wire feeding speed, so that the effect and the yield rate of the Calcium ferro cored wire can be brought into full play.

　　By mastering the feeding speed of the Calcium ferro cored wire, the yield and effect of the Calcium ferro cored wire can be effectively improved. Huatuo Metallurgical is a professional Calcium ferro cored wire manufacturer, providing long-term production of Calcium ferro cored wire. Professional customer service and high-quality products, if you have any questions about using calcium iron cored wire, you can always consult and cooperate.